264 found, showing page 1 of 18
Composite shim with holes. 4 times stronger load support, 5 times quicker snap-off. Smoother nailing. No splinters, splitting, or jagged edges. Performance engineered with perforations. 12 shims per bundle.
Made from kiln dried, northern white woods. Poly bagged, 9 shims per bag. 6 preloaded clip strips with 12 bags per strip, total of 72 bags per case.
Made from kiln dried, northern white woods. 56 shims per box. The closeable box makes carrying the product from job site to job site convenient. Gret item for prodessional contractors, cabinet makers, and door and window installers. Easy to cut. Resists Splitting
3/8 In. x 1-1/2 In. tapered to 1/16 In. or less, 8 In. long. Made from kiln dried, northern white woods. Used for setting door jambs and window frames, shimming plates, cabinets, floors, joists, furring strips, and under splices on wood siding. For best results use in pairs. 12 shims per bundle.
Use when you need to quickly align a door in the jam. There are 3 shims per leaf. Each shim can fold together for 1/16", 1/8" or 3/16" of a door adjustment. Made of high-impact plastic and will not compress.
Use when you need to quickly align a door in the jam. There are 3 shims per leaf. Each shim can fold together for 1/16", 1/8" or 3/16" of a door adjustment. Made of high-impact plastic and will not compress.
Kiln dried cedar shim. For use as shims, undercourse, and siding on secondary buildings. 1-1/2" W x 3/8" thick x 15" L. 42 shims per bundle.
Shim pack. Made from kiln dried, northern white woods. 42 shims per bundle.
8 In. long, wood fiber/thermoplastic composite shims. 35% more load support, snaps 4.5 times easier than traditional wood shims. Waterproof, will not mildew. 32 shims/box.
3/4" x 5/16" plastic square cut frame corner. Eliminates the need for mitering. Use with 3/4" x 5/16" aluminum screen frame.
Mounts at top of exterior window jamb to secure screen in place. Often used with wire loop latches at bottom of screen. 6 per card.
1/16 In. x 1-9/16 In. stamped aluminum bail latches install into the spline channel of window screen. Mill finish.
These are 3/4 in. x 7/16 in. plastic corners for window screen panels are designed to fit into square-cut ends of 7/16 in. aluminum screen frame material to repair or construct new aluminum-framed screens. Square-cut assembly eliminates the need for miter cutting providing for an easier frame construction by the homeowner. Constructed of plastic.
3/8" plastic square cut corner eliminates the need for mitering. For use with 3/8" aluminum frame.
3/4" x 3/8" plastic square cut frame corner is designed to fit into square-cut ends of aluminum screen frame material to repair or construct new aluminum framed screens. Eliminates the need for mitering.